The Vortex Venom 1-6x24 LPVO and Red Dot Combo Pack is an integrated riflescope and reflex sight system for AR-platform carbines used in mixed-distance engagements. The technical pain point it addresses is the transition gap between magnified target identification and rapid close-range aiming, where users lose time breaking cheek weld to manipulate magnification; the design solution is a fixed top-mounted reflex optic paired with a 1x-capable LPVO so range changes don’t require mechanical input.
A second friction point is optical distortion and a restrictive eyebox common in entry-level LPVOs, which degrades situational awareness at 1x. The optical design of the 1-6x24 scope maintains a true-to-life field of view with reduced edge distortion, and the integrated cantilever mount with red dot top cap pre-sets optic height and offset to maintain consistent cheek weld and mechanical alignment across both sighting planes.
In motion, the system supports continuous engagement flow: the 30mm tube increases internal adjustment range for zero retention, the 24mm objective balances light transmission with reduced front-end mass for faster rifle handling, and the 3 MOA dot size on the reflex optic provides a visible aiming reference without obscuring targets at CQB distances, so transitions stay linear under recoil and movement.
Key Benefits
- Eyebox tolerance combined with an optical design that reduces edge distortion enables both-eyes-open shooting at 1x with no fisheye artifacts
- Top-mounted reflex optic with fixed mechanical offset on cantilever mount eliminates magnification changes during distance transitions
- 30mm tube diameter and increased internal adjustment range provide zero retention after impacts and recoil cycles
- AR-BDC3 illuminated reticle with calibrated hold points allows repeatable elevation holds without dialing turrets
Technical Specifications
- Optic system: Vortex Optics Venom LPVO + Venom Red Dot
- SKU: SON-3901
- LPVO model: Vortex Venom 1-6x24 SFP
- Red dot model: Vortex Venom 3 MOA Red Dot
- Focal plane: Second Focal Plane (SFP)
- Magnification: 1x–6x
- Objective diameter: 24 mm
- Tube diameter: 30 mm
- Reticle: AR-BDC3, illuminated
- Mounting system: cantilever mount with top-mounted red dot cap
- Length: ~10.3 in
- Adjustment interface: capped turrets
- Application platform: AR-pattern carbines
- Optical plane: dual-plane sighting with fixed mechanical offset
- Ingress protection: manufacturer-rated sealed housing (industry standard O-ring sealed optics)
Secure this integrated LPVO system from SMKW, your authorized source for professional-grade optics and technical support. Level up your AR-platform with a single-mount solution designed to eliminate transition delays and maximize your precision today.