Disposable utility blades snap under side pressure during tough jobsite cuts, while bulky outdoor knives lack the nimble control needed for detailed woodcarving and craft work—and dull-colored handles are easy to lose on cluttered benches or forest floors. Made in Mora, Sweden, the Morakniv Basic 511 (C) pairs a razor-sharp 3.6-inch Swedish carbon steel Scandi-ground blade (hardened to 59–60 HRC) with a high-visibility Lime and Grey polypropylene handle and protective finger guard. Weighing just 3.9 ounces and shipping with a modular polymer belt sheath, it delivers effortless carving bite, fast field sharpening, and reliable daily utility.
Handcrafted in Mora, Sweden, around a 3.60-inch Swedish carbon steel drop-point blade (0.08-inch spine thickness), this Limited Edition 2026 utility and craft knife is heat-treated to 59–60 HRC for high edge keenness and rapid field touch-ups. Ground with a classic Scandi grind in a clean satin silver finish, the blade slices cleanly through wood, cordage, and heavy cardboard (wipe dry and apply a light coat of oil after use to prevent corrosion). Built over an encapsulated partial tang, the ergonomic handle pairs a rigid dark grey impact-resistant polypropylene frame with high-visibility lime green grip panels and pommel cap for fast visual tracking at the workbench or campsite.
Engineered for safe, fatigue-free precision across its 8.80-inch overall length, the 4.40-inch contoured handle incorporates a robust lower finger guard that keeps your hand securely behind the cutting edge during push cuts and carving. Housing the 3.90-ounce knife is a molded polymer belt sheath featuring an integrated belt clip and Morakniv's signature front button-connector stud, allowing you to stack and link a second Morakniv sheath for expanded tool carry.
Product Benefits
- 3.6-Inch Swedish Carbon Steel Blade (59–60 HRC): Heat-treated carbon steel holds a keen edge through demanding wood, rope, and cardboard cuts while sharpening easily in the field (wipe dry and oil lightly after use to prevent corrosion).
- Classic Scandi Grind Geometry: Traditional Scandinavian bevel bites cleanly into wood for controlled carving, feather-sticking, and precision craft work without wedging.
- High-Visibility Lime & Grey Polypropylene Handle with Finger Guard: Ergonomic polymer grip combines a dark grey frame, high-visibility lime side panels, and a robust lower finger guard to keep fingers safely behind the edge.
- Modular Polymer Belt Sheath with Button-Connector: Included molded sheath locks the knife securely in place and features a belt clip plus a front button stud for attaching a second Morakniv sheath.
- Featherweight 3.9-Ounce Swedish Build: Measures 8.8 inches overall and weighs just 3.9 oz for fatigue-free belt or toolbox carry.
The Morakniv Basic 511 (C) (202340) is a Swedish-made utility, craft, and outdoor fixed-blade knife featuring a 3.60” Swedish carbon steel plain drop-point blade (0.08” thick, 59–60 HRC) with a Scandi grind and Satin finish. The handle is impact-resistant polypropylene in Dark Grey with High-Visibility Lime Green grip panels, a matching pommel cap, and an integrated lower finger guard over an encapsulated partial tang, complete with a molded polymer belt sheath featuring a belt clip and front button-connector. It measures 4.40” handle length, 8.80” overall, and weighs 3.90oz. Made in Mora, Sweden.
SMKW—your trusted source for Morakniv utility knives, Swedish carbon steel Scandi blades, and jobsite or camp cutting tools. Equip your tool belt, workbench, or pack with razor-sharp 59–60 HRC carving performance and high-visibility Lime and Grey ergonomics by ordering the Morakniv Basic 511 (C) (LM202340) from Smoky Mountain Knife Works today.