Released: April 17th, 2026

The FerraMonster Urbangrip V2 features a 3.67-inch Bohler M390 drop-point blade with a hand-rubbed satin black DLC coating, giving it a muted, worn-in look that softens the transition between the flats and bevels. It opens using a front flipper or thumb stud and runs on a ball-bearing pivot, delivering a smooth, controlled action with each deployment, while a framelock provides solid lockup. The 4.75-inch black 6AL4V titanium handle is fitted with a purple carbon fiber inlay that shows a marbled, almost electric pattern under the light. The Urbangrip V2 measures 8.34 inches overall, weighs 3.88 ounces, and carries securely with a black titanium pocket clip.

Released: April 17th, 2026

The FerraMonster Urbangrip V2 is built around a 3.67-inch Bohler M390 drop-point blade with a bead-blasted finish that gives the surface a soft, low-glare appearance while clearly defining the grind lines and edge geometry. It opens using a front flipper or thumb stud and runs on a ball-bearing pivot, producing a smooth, controlled action with a framelock providing solid, dependable lockup. The 4.75-inch gray 6AL4V titanium handle is fitted with an iridescent carbon fiber inlay that shows a marbled, layered pattern, adding a unique contrast while maintaining a clean, restrained look. The Urbangrip V2 measures 8.34 inches overall, weighs 3.88 ounces, and carries securely with a titanium pocket clip.

Released: April 17th, 2026

The FerraMonster Urbangrip V2 features a 3.67-inch Bohler M390 drop-point blade with a hand-rubbed satin finish that brings out the clean lines of the grind while giving the surface a bright, refined look. It deploys using a front flipper or thumb stud and runs on a ball-bearing pivot, producing a smooth, controlled action with a framelock ensuring secure lockup. The 4.75-inch silver 6AL4V titanium handle is fitted with marbled carbon fiber inlays that show a flowing pattern, accented by gold-tone hardware that adds contrasts nicely against the lighter frame. The Urbangrip V2 measures 8.34 inches overall, weighs 3.88 ounces, and carries with a hand-rubbed satin titanium pocket clip for easy EDC.

Released: April 17th, 2026

The FerraMonster Urbangrip V2 uses a 3.67-inch Bohler M390 drop point blade with a black stonewashed finish that gives the surface a subdued, working look while helping mask wear over time. It opens with either a front flipper or thumb stud and runs on a ball-bearing pivot, delivering a smooth, consistent action, with a framelock providing secure, reliable lockup. The 4.75-inch black 6AL4V titanium handle is paired with a green carbon fiber inlay that shows a deep, swirling pattern, complemented by matching green hardware that ties the build together. The Urbangrip V2 measures 8.34 inches overall, weighs 3.88 ounces, and carries securely with a black stonewash titanium pocket clip for everyday use.

Released: April 17th, 2026

The FerraMonster Reaver is a full-sized framelock built with a focus on strength, clean machining, and a balanced in-hand feel. It features a 3.82-inch CPM S90V clip-point blade with a hand-rubbed satin finish that highlights the grind lines and sharp, defined tip. The blade opens using ambidextrous thumb studs and runs on a ball-bearing pivot, delivering a smooth, controlled action, with a framelock providing solid, reliable lockup. The 4.99-inch 6AL4V titanium handle has a bead-blasted finish with fine machining lines, accented by purple anodized hardware that adds subtle contrast without overwhelming the design. It measures 8.66 inches overall, weighs 4.18 ounces, and carries comfortably with a titanium pocket clip or a lanyard hole for additional carry options.

Released: April 17th, 2026

The FerraMonster Reaver takes a more contrast-driven approach, pairing a 3.82-inch CPM S90V clip-point blade with a black DLC-coated finish that stands out against the lighter frame while adding surface protection and wear resistance. It opens with ambidextrous thumb studs and runs on a ball-bearing pivot, giving it a smooth, controlled action, with a framelock holding the blade securely in place. The 4.99-inch 6AL4V titanium handle features a bead-blasted finish with fine machining lines, accented by blue anodized hardware and a matching backspacer that adds a distinct visual pop. It measures 8.66 inches overall, weighs 4.18 ounces, and sits comfortably in a pocket with a titanium pocket clip and a lanyard hole for additional options.

Released: April 17th, 2026

The FerraMonster Reaver leans into a more understated configuration, pairing a 3.82-inch CPM S90V clip-point blade with a belt-satin finish that brings out the clean grind lines and working edge. It opens with ambidextrous thumb studs and rides on a ball-bearing pivot for a smooth, consistent action, with a framelock providing a secure, dependable lockup. The 4.99-inch 6AL4V titanium handle features a bead-blasted finish with fine machining lines, contrasted by black anodized hardware and a matching backspacer, giving the build a more restrained, monochromatic look. It measures 8.66 inches overall, weighs 4.18 ounces, and is supported by a black anodized titanium pocket clip, with a lanyard hole for added versatility.

Released: April 17th, 2026

The FerraMonster Reaver takes on a darker, more contrast-driven build with a 3.82-inch CPM S90V clip point blade featuring a black DLC coating that has been belt satin finished, creating a worn texture that breaks up the darker surface while still offering added protection and corrosion resistance. It opens using ambidextrous thumb studs and runs on a ball-bearing pivot, delivering a smooth, controlled opening, while the framelock provides a solid, dependable lockup. The 4.99-inch 6AL4V titanium handle is finished in black PVD with fine machining lines, giving it a clean, uniform look, while a flamed titanium pocket clip adds a distinct pop of color against the dark frame. It measures 8.66 inches overall, weighs 4.18 ounces, and includes a lanyard hole for additional EDC carry options.

Released: April 17th, 2026

The Wixco Fenix WX21-A is a modern EDC folder that leans into bold styling while maintaining a practical, lightweight build. It features a 3.74-inch Bohler N690 tanto blade with a satin finish that brings out the angular grind lines and reinforced tip, giving it a strong piercing capability and controlled cutting performance. It opens with a front flipper and runs on a ball-bearing pivot, delivering a smooth, deliberate action, with a linerlock providing secure lockup. The 4.53-inch purple anodized aluminum handle is lightly textured for grip and paired with a matching backspacer that includes an integrated lanyard slot. It measures 8.27 inches overall, weighs 3.53 ounces, and carries with an ambidextrous stainless steel pocket clip.

Released: April 17th, 2026

The Wixco Fenix WX21-B is a two-tone EDC folder that pairs a more tactical look with a lightweight, functional build. It features a 3.74-inch Bohler N690 tanto blade with a black DLC coating that adds wear resistance while giving the blade a darker, low-profile finish. It opens using a front flipper and runs on a ball-bearing pivot, delivering a smooth, controlled action, with a linerlock providing secure lockup. The 4.53-inch aluminum handle uses a split design, combining an orange front scale with a black rear scale, both textured for grip and paired with a backspacer that includes a lanyard slot. It measures 8.27 inches overall, weighs 3.53 ounces, and carries with an ambidextrous stainless steel pocket clip.

Released: April 17th, 2026

The Wixco Fenix WX21-C is a streamlined EDC folder that leans into a clean, uniform look while keeping a lightweight, practical build. It features a 3.74-inch Bohler N690 tanto blade with a gray stonewashed finish that softens the grind lines and helps mask wear from regular use. It opens using a front flipper and runs on a ball-bearing pivot, delivering a smooth, controlled action, with a linerlock providing secure lockup. The 4.53-inch navy blue anodized aluminum handle has fine texturing for grip, paired with a matching backspacer that includes a lanyard slot for added versatility. It measures 8.27 inches overall, weighs 3.53 ounces, and carries with an ambidextrous stainless steel pocket clip.

Released: April 17th, 2026

The Wixco Fenix WX21-D brings a brighter, more eye-catching take to the platform while keeping the same lightweight, everyday carry focus. It features a 3.74-inch Bohler N690 tanto blade with a bead-blasted finish that gives the surface a soft, matte appearance while maintaining a clean, functional edge. It opens using a front flipper and runs on a ball-bearing pivot, producing a smooth, controlled action, with a linerlock providing secure lockup. The 4.53-inch mint green anodized aluminum handle has fine texturing for grip, paired with a matching backspacer that includes a lanyard slot for added versatility. It measures 8.27 inches overall, weighs 3.53 ounces, and carries with an ambidextrous stainless steel pocket clip.

Released: April 17th, 2026

The Wixco Jugger WX22-A is a button lock folder that leans into smooth operation and a more expressive handle design while maintaining a solid EDC foundation. It features a 3.74-inch Bohler N690 clip-point blade with a stonewashed finish that gives the surface a worn, low-glare look while helping hide use over time. It opens using ambidextrous thumb studs and is secured with a push-button lock, delivering a clean, responsive action allowing for easy one-handed use. The 4.53-inch marbled carbon fiber handle shows a shifting pattern with hints of red and yellow beneath the surface, accented by purple anodized hardware. It measures 8.27 inches overall, weighs 3.92 ounces, and comes with a black pocket clip.

Released: April 17th, 2026

The Wixco Jugger WX22-B carries a cleaner, more refined look while keeping the same reliable platform and everyday carry performance. It features a 3.74-inch Bohler N690 clip-point blade with a satin finish that highlights the grind lines and sharp, defined tip. It opens using ambidextrous thumb studs and is secured with a push-button lock, delivering a smooth, controlled action with easy one-handed operation. The 4.53-inch marbled carbon fiber handle shows a mix of blues and darker tones that shift under the light, paired with bright, blue anodized accents that add a pop of color without overpowering the design. It measures 8.27 inches overall, weighs 3.92 ounces, and comes with a black pocket clip.

Released: April 17th, 2026

The Wixco Jugger WX22-C takes on a darker, more layered look while maintaining the same button lock platform and everyday carry focus. It features a 3.74-inch Bohler N690 clip point blade with a black stonewashed finish that gives the surface a textured, low-glare appearance while helping conceal wear over time. It opens using ambidextrous thumb studs and is secured with a push-button lock, delivering a smooth, responsive action with easy one-handed operation. The 4.53-inch marbled carbon fiber handle shows a mix of blues, greens, and dark tones that shift under the light, paired with matching blue anodized accents for added contrast. It measures 8.27 inches overall, weighs 3.92 ounces, and comes with a black pocket clip.

Drew is the lead writer for SMKW's Knives 101, crafting informative and engaging content for the world’s largest knife store. With expertise in knife history, design, and functionality, Drew delivers articles and product descriptions that educate and inspire knife enthusiasts at all levels.

T.C. Barnette is a dynamic media personality and the esteemed spokesperson for SMKW (Smoky Mountain Knife Works), where his passion for knives intersects with his captivating on-screen presence. With a magnetic charisma and deep expertise in cutlery, T.C. has become a beloved figure in the knife community.